HP acrylic polishing kit acrylic bur kit Each Shofu 0321B Shofu 0321B

Features & Benefits:

• Acrylic polishing kit is for chairside or laboratory adjusting and polishing acrylic dentures and appliances at a value that no competitor can match.
• Shofu dental is going back to basics with a portfolio of new abrasive kits to allow for stress-free selection of the ideal kit regardless of the restorative material being polished. Each kit has the perfect assortment of abrasives and polishers to guarantee fast, predictable, and aesthetic results. Simply match the abrasive kit to the dental material — it’s that easy!
• This kit is designed for chairside or laboratory adjustment and polishing of acrylic dentures or any acrylic appliance.
• The kit includes 3 AcryPoint BP1’s, one of each Coarse, Medium & Fine, 3 AcryPoint PC’s, two of each Coarse, Medium & Fine, 1 Robot Carbide HP Cutter SH 79E, 1 Robot Carbide HP Cutter SH 251E.

Precautions And Warnings:

• Never exceed the maximum permissible rotating speed. Acrypoint required speed 5,000-15,000 rpm. Robot carbide required speed 0-50,000 rpm.
• Operate at recommended pressure only.
• Insert the shank completely into the chuck of the hand piece, following the manufacturer’s instructions.
• Perform test run to check safety and smooth operation without run-out prior to use.
• Make sure that abrasive head is in good condition before use. Do not use damaged or defective instruments i.e. Corrosion, surface flaw, deformation, dirt, exposure of shank due to repeated use.
• Use local dust extractor, protective mask, etc while contouring and finishing to avoid adverse effect of dust to the human body.
• Use protective equipment such as glasses while using.
• Avoid any use at acute angles or with excessive pressure to thin and long abrasives. They are fragile and may bend or fracture under excessive loads.
• This product is intended for use by dental professionals only.
• Use the points for indicated purpose only.
• Storage And Sterilization: This kit can be sterilized in any steam or chemical autoclave. Store this product avoiding exposure to moisture, corrosive chemical and its vapor. Keep away from external pressure (physical load) and avoid contamination. When using intraorally, sterilize this product before each use. For reuse after using, remove any contaminants immediately with washer disinfector, then sterilize. Follow the instructions for use of washer disinfector and sterilizer, respectively. Chlorine disinfectant must not be used to avoid corrosion of the instruments.

Application:

• Acrypoint coarse: adjustment.
• Acrypoint medium: finishing.
• Acrypoint fine: polishing.
• Robot carbide cutters: adjustment, cutting and trimming.