Posey Respiratory Cufflator™ Endotracheal Tube Inflator and Manometer TIDI 8199

Item Number: 8199
Packaging: ea
Manufacturer: Tidi Products
$420.49

Features & Benefits:

  • The POSEY® CUFFLATOR™ Endotracheal Tube Inflator and Manometer is designed to only be used on tracheal tubes with high-volume, low-pressure cuffs.
  • It helps to eliminate the need for syringes, electricity, or complicated connections required to check cuff pressure.
  • The air vent button and inflator bulb adjust cuff pressure quickly and easily, and the gauge shows recommended pressure range.
  • Deflates and inflates high-volume, low-pressure endotracheal or tracheal cuffs
  • Air vent button and inflator bulb adjusts cuff pressure quickly and easily
  • Gauge shows recommended pressure range in cm H2O
  • An alternative to other methods that are required to check cuff pressure
  • The Posey Cufflator should only be used on tracheal tubes with high-volume, low-pressure cuffs.
  • NOTE: The Posey Cufflator is designed only for use with air-filled cuffs. Use with saline-filled cuffs will cause damage to the unit and void the product warranty.
  • Before use, the control inflator needs to be checked as follows:
    • Close connecting piece with the finger.
    • Inflate with inflation bulb to 120 cm H2O; value must be constant for 2-3 seconds. If the pressure drops, the device needs repair by the Posey Company.
    • Inspect the unit and check the cuff for leaks prior to use. Prior to intubation or extubation, withdraw all the air from the cuff with a syringe and close the inflation line.
  • To properly seal:
    • Connect the patient to the ventilator.
    • Connect the Posey Cufflator to the cuff inflation line, and inflate the cuff to a pressure in the range of 60-90 cm H2O. This will ensure that the cuff is in close contact with the tracheal wall.
    • Immediately release air by pressing the red release button until the lowest safe cuff pressure level is reached.
    • Intra-cuff pressure should be maintained at a minimum of 20-25 cm H2O to reduce the occurrence of microaspiration1 and a maximum of 34 cm H2O to decrease the incidence of mucosal ischemia and subsequent stenosis.
  • The extension tube may be used if constant monitoring of intra-cuff pressure is desired. Connect the extension tube to the cuff inflation line and to the Posey Cufflator. Use the hook on the back of the Posey Cufflator to hang it on the headboard of the bed. The Posey Cufflator will now monitor the intra-cuff pressure continuously and can be inflated or deflated as required.
  • The accuracy of the Posey Cufflator may be verified by connecting it to a mercury sphygmomanometer. Note: The Posey Cufflator is calibrated in cm of water pressure (H2O). The conversion rate is 1 mm of mercury (Hg) equals 1.36 cm water (H2O). For example, the Posey Cufflator will read 20 cm H2O when the mercury sphygmomanometer reads 14.7 mmHg.
  • The accuracy of measurements is ± 2 cm H2O for the entire range.

Application:

  • used on tracheal tubes.
Show More
Write Your Own Review
You're reviewing:Posey Respiratory Cufflator™ Endotracheal Tube Inflator and Manometer TIDI 8199
Your Rating
@2024 Prime Dental & Medical Supply Inc., All Rights Reserved