Prospray C-60 Concentrate, 1 Gallon, 4 Bottle/Case Certol PSC60/128-1

Item Number: PSC60/128-1
Packaging: 1 Gallon
Manufacturer: Certol International
Rx
Item Discontinued.
$163.19

Features & Benefits:

  • ProSpray C-60 is a concentrated surface disinfectant and cleaner in one product, approved for use in medical and dental settings.
  • Concentrated disinfectant/cleaner with broad spectrum activity against a wide variety of organisms.
  • Effective against MRSA-CA and HA.
  • Concentrated format saves money and storage space.
  • Approved for 60 day use after dilution.
  • Unit dose tubes offer consistent accuracy and convenience. Each tube makes 16 ounces diluted solution.
  • Empty 16 oz. spray bottle is labeled for OSHA compliance.
  • Inactivates Benchmark M. tuberculosis var. bovis (TB) in Five Minutes: Meets CDC guidelines for surface disinfection in the presence of blood and other soils.
  • Available in 1 Gallon 4 Bottle/case.
  • Specifications:

  • Active Agents: 9% o-phenylphenol, 1% o-benzyl-p-chlorophenol.
  • Dilution: 1:32
  • EPA Reg. #: 46851-1
  • Solution Color: Natural color.
  • Odor: Lemon scent when diluted.
  • Use Life: 60 days for diluted unused solution.
  • Shelf Life: 2 years from date of manufacture.
  • Water Based Formula with Non-Alcohol Actives:

  • Water based formula preferred for a wide variety of surfaces including vinyl, metals, plastics, tubing and faux leather upholstery.
  • Will not stain or bleach hard surfaces.
  • Stays wet on surfaces longer for full contact time.
  • Use around electronics is consistent with manufacturers' recommendations for non-alcohol, non-bleach formula.
  • Hard on Germs - Not on Bare Hands:

  • So safe it is now EPA approved for use after dilution without gloves (in absence of bio-hazards).
  • Convenient and Pleasant to Use:

  • Deodorizer with light lemon scent.
  • Reduce inventory: One product cleans and disinfects.
  • Formulated for effective action in hard water.
  • Approved for 60 day use life after dilution.
  • Residual Activity:

  • Sustained antimicrobial action after application which is not found with alcohol or bleach compounds.
  • Economical Choice:

  • 32 ounces makes 8 gallons of diluted solution.
  • Easy consistent dilution: 1/2 ounce unit dose tube makes 16 ounces of diluted solution.
  • Concentrate reduces shipping costs and storage space.
  • Broad Spectrum Disinfecting Power in One Minute:

  • Viruses including HIV-1 and Herpes simplex virus type 1 & 2.
  • Vegetative bacteria including Staphylococcus aureus, Methicillin-resistant Staphylococcus aureus, Salmonella enterica and Pseudomonas aeruginosa.
  • Fungi including Trichophyton mentagrophytes.
  • Product Capabilities:

  • Kills a broad range of microorganisms including HIV-1, Staphylococcus aureus, Staphylococcus aureus - MRSA HA, Salmonella enterica, Pseudomonas aeruginosa, Herpes simplex virus types 1 & 2 and Trichophyton mentagrophytes (Fungus) in one minute.
  • Kills tuberculosis var. bovis (TB) in five minutes.
  • Cleans and Disinfects:

  • Because effective disinfection relies on effective removal of soil, ProSpray C-60 is ideal for both steps - no need for two separate products. Special detergents in ProSpray C-60 clean even dried on blood and other soils.
  • Safe for Surfaces:

  • Water based disinfectant formulas are preferred by upholstery manufacturers. And, unlike alcohol-based formulas, ProSpray C-60 will not soften or haze vinyls and plastic. ProSpray C-60 will not corrode metals or stainless-steel counters as may occur with bleach and hydrogen peroxide-based products. It will not stain or bleach surfaces even with repeated use.
  • How to Use:

  • For surface disinfection as a "one-step" cleaner/disinfectant for surfaces that are not visibly soiled:
    • Spray or squirt diluted ProSpray C-60 onto surfaces or apply using paper towels or 4 X 4 gauze. Allow surfaces to stay wet for five minutes.
  • For surface disinfection on surfaces with visible blood and soils:
    • ProSpray C-60 is an intermediate-level hospital disinfectant with TB kill, meeting CDC Guidelines and OSHA for cleaning and disinfecting surfaces with blood and body soils. Use the 2 step method: Clean surfaces by spraying or squirting diluted ProSpray C-60 solution onto surfaces or paper towels or 4 X 4 gauze. Wipe to remove soils. Discard used wipe material. Reapply diluted ProSpray C-60 solution to surfaces and keep wet for a total of five minutes.
  • For instrument holding and cleaning solution:
    • Check instrument manufacturer's instructions. Fill pan or ultrasonic tank with sufficient diluted solution to cover instruments. Soak for 5 minutes. Avoid prolonged soaking over one hour.
  • For disinfecting dental impressions and appliances:
    • Check dental material manufacturer's instructions. ProSpray C-60 is a water-based disinfectant recommended to disinfect many types of dental impression materials. It is bleach-free and will not corrode the metal portions of appliances. Rinse and remove gross debris from item. Place impression or appliance inside baggie, thoroughly wet all surfaces with diluted ProSpray C-60 solution, allow 5-minute contact time. Remove and rinse item gently.
  • Use Precautions:

  • A slight soap film may occur upon repeated application of ProSpray C-60 due to detergents in the formula. Simply wipe surfaces off at least weekly with plain water and paper towels.
  • Rinse garments or surfaces where ProSpray C-60 is used prior to application of any bleach product. Store solution away from direct heat and direct sunlight.
  • Avoid freezing during shipping or storage.

Application:

  • Surface cleaner: Contains detergents and surfactants for essential pre-cleaning.
  • Intermediate-level disinfectant.
  • Ultrasonic instrument cleaning and holding solution.
  • Disinfect dental impressions and appliances.
  • Detergents in the water based formula provide effective cleaning.
  • It may be used on surfaces, as a cleaning solution for instruments and as a disinfectant for dental impressions and appliances.
Show More
ProSpray Surface Disinfectant

FAQs

  • What is ProSpray C-60?

    ProSpray C-60 is a concentrated intermediate level tuberculocidal surface disinfectant and cleaner approved for use in healthcare settings. The light lemon scent makes frequent disinfection tasks more pleasant. It is formulated to be diluted at 1:32 prior to use.

  • What is the contact time for ProSpray C-60?

    ProSpray C-60 is tested and approved for a one minute contact time to inactivate HIV-1, Herpes simplex virus type 1 and 2, Staphylococcus aureus and methicillin-resistant Staphylococcus aureus (MRSA), Salmonella enterica, Pseudomonas aeruginosa and fungi such as Trichophyton mentagrophytes. ProSpray C-60 inactivates benchmark M. tuberculosis var. bovis (TB) in five minutes.

  • What are the chemical actives in ProSpray C-60?

    This product is a water-based dual synthetic phenolic compound with o-phenylphenol and o-benzyl-p-chlorophenol. Synthetic phenolics combine reliable disinfectant qualities with tested safety for low toxicity. Recent independent lab testing reaffirms the safe use of ProSpray C-60 with bare hands in the absence of biohazards after dilution. Always use gloves when diluting concentrated solutions.

  • What is CDC guidance for disinfectant activity against Hepatitis B and Hepatitis C?

    Ability of a disinfectant to inactivate M. tuberculosis var. bovis (TB) is considered a benchmark by the CDC to designate intermediate-level disinfectant activity. It makes ProSpray C-60 suitable for use in healthcare and other settings where blood and other human soils are likely to be present. The CDC also states that any germicide with a tuberculocidal claim on the label is considered capable of inactivating less resistant blood borne pathogens such as HIV, Hepatitis B and Hepatitis C.

  • Does ProSpray C-60 have EPA registration?

    Yes, it is regulated as a General Purpose, hard surface cleaner/ disinfectant by the EPA and as such has undergone required AOAC testing with subsequent registration # 46851-1.

  • What is the benefit of non-alcohol actives in the ProSpray C-60 formula?
    • Disinfectants with alcohol tend to evaporate quickly making full contact time more difficult.
    • Alcohol interferes with cleaning by causing blood and proteins to adhere more tightly.
    • Long term use of disinfectants containing alcohol and/or solvents may cause tubing, vinyls and plastic housing to crack and discolor.
  • Why should clinicians avoid disinfectant products with solvents?

    Solvents such as glycol ethers are added to some disinfectants to reduce contact time. This ingredient is not found on the main label but will be listed in product Safety Data Sheets. Testing of products with glycol ethers demonstrates visible damage to acrylic plastic and similar surfaces after long term application. ProSpray C-60 has no glycol ether solvents in the formula.

  • How should ProSpray C-60 be used?

    First, prepare ProSpray C-60 by diluting according to package directions. Next, for surface disinfection as a "one-step" cleaner/ disinfectant for surfaces that are not visibly soiled: Spray or squirt prepared ProSpray C-60 onto surfaces or apply using paper towels or 4 X 4 gauze. Allow surfaces to stay wet for five minutes. For surface disinfection on surfaces with visible blood and soils: Use the 2 step method: Clean surfaces by spraying or squirting prepared ProSpray C-60 onto surfaces or paper towels or 4 X 4 gauze. Wipe to remove soils. Discard used wipe material. Reapply ProSpray C-60 to surfaces and keep wet for a total of five minutes. For instrument holding and cleaning solution: Check instrument manufacturer's instructions. Fill pan or ultrasonic tank with sufficient ProSpray C-60 to cover instruments. Soak for 5 minutes. Avoid prolonged soaking over one hour.

  • Is ProSpray C-60 recommended for use to disinfect dental impressions and appliances?

    Yes. It is water based and meets most recommendations for disinfection of dental impression materials. It is bleach-free and will not corrode the metal portions of appliances. Rinse and remove gross debris from item. Place impression or appliance inside baggie, thoroughly wet all surfaces with prepared ProSpray C-60 and allow 5-minute contact time. Remove and rinse item gently.

  • How should ProSpray C-60 be used for disinfection of tubing on equipment used to clean devices with channels and cannulas?

    Prepare ProSpray C-60 according to package directions. Use prepared solution and follow the cleaning equipment manufacturer's directions and a five-minute contact time. Rinse disinfectant residue out of tubing after disinfection is completed.

  • Why is cleaning such an important step in environmental disinfection?

    ProSpray C-60 contains surfactants and detergents to quickly remove body soils, blood and dust. Soils act as a barrier between disinfectants and germs on surfaces. Blood and body soils also act as carriers to keep some germs viable (able to infect) for days or even weeks. Patients perceive safety and infection prevention through a clean and sanitary environment.

  • What color range should I expect to see in ProSpray C-60 concentrated solution?

    This product contains synthetic phenolics which are naturally tan to brown. Concentrated ProSpray C-60 will appear light golden brown to medium brown. Heat, light and air exposure will accelerate color change. Also check expiration date (stamped on every container). This product has a two-year use life after date of manufacture.

  • How to cut down on aerosols created during environmental cleaning and disinfection?

    Saturate paper towel or gauze applicator with prepared ProSpray C-60, then apply to surface. Do not "fog" treatment areas. Use ProSpray™ wipes presaturated disinfectant wipes with similar water-based dual synthetic phenolic actives and a three-minute contact time.

  • Is it appropriate to use a stack of gauze pads pre-saturated with prepared ProSpray C-60 solution?

    This is not best practice. Gauze fibers may interact with disinfectant agents and reduce efficacy. Reaching into an open container may introduce contamination. Gauze at the bottom may not be used in a timely fashion and become degraded.

  • Does ProSpray C-60 have residual antimicrobial properties on surfaces?

    Yes, phenolic disinfectants have demonstrated persistence of antimicrobial action on surfaces well after the initial application.

  • Will ProSpray C-60 stain surfaces?

    No, it is non-staining but after repeated use may leave residue from surfactants in the formula. This is easily avoided by simply wiping surfaces with water and paper towels at least weekly. ProSpray C-60 actives may interact with bleach creating a permanent stain on porous surfaces and textiles. Rinse surfaces and clothing prior to any application of bleach products.

  • Can I use ProSpray C-60 as a "cold sterile soak" for plastic items that cannot tolerate heat sterilization?

    Items that are used inside the mouth or other mucosal surfaces such as film holders, bite blocks and laryngeal airway devices are considered semi-critical. According to CDC guidelines such items preferably should be heat sterilized or at a minimum disinfected using high-level disinfectant processes (gluteraldehyde, peracetic acid, ethylene oxide gas, etc.). ProSpray C-60 is an intermediate-level disinfectant.

Show More
Write Your Own Review
You're reviewing:Prospray C-60 Concentrate, 1 Gallon, 4 Bottle/Case Certol PSC60/128-1
Your Rating
pdf
(Size: 137.8 KB)
@2024 Prime Dental & Medical Supply Inc., All Rights Reserved