Tuff-Temp™ Plus Provisional Veneer, Crown & Bridge Resin, 5mL Automix Syringe, 8 Automix Tips, 3mL Glaze, Shade A3.5 Pulpdent TTP5A35

Item Number: TTP5A35
Packaging: ea
Manufacturer: Pulpdent Corporation
Special Order Item. 14-21 Days Delivery. Item can not be returned.
$43.99

Features & Benefits:

  • Tuff-Temp™ Plus Provisional Veneer, Crown & Bridge Resin is Dual Cure Material and has Improved Rubberized-Resin Chemistry.
  • Strong, impact resistant rubberized-resin doesn't shrink or distort and grips the tooth tightly.
  • Virtually eliminates fractures and debonding.
  • Grinds and powders during trimming without softening or distorting. Margins are perfect.
  • The light cure option produces a full strength restoration on demand and is ideally suited for use with a clear vinyl polysiloxane template.
  • Flexural Strength / Deflection at Break.
  • Tuff-Temp™ Plus exhibits very high flexural strength without brittleness. Its deflection at break, the key indicator of toughness, is 50% to 100% greater than bis-acrylics.
  • Tuff-Temp Provisional Glaze is a light cure glaze with the same proprietary rubberized-urethane chemistry that provides enhanced esthetics and patient satisfaction during temporization.
  • Tough and resilient.
  • Impact and fracture resistant.
  • Tight fitting temps grip teeth securely.
  • Greatly reduces breakage and cementation failures.
  • Grinds and powders without softening.
  • Trims to crisp, perfect margins.
  • Does not gum up finishing instruments.
  • Self-cure with fast light cure option.
  • Enhanced esthetics.
  • Faster setting time.
  • Snap set.
  • Fluorescence added.
  • Includes Tuff-Temp Plus 5mL automix syringe, 8 automix tips, 3mL Tuff-Temp Glaze, Shade A35 (For A3.5).
  • Tuff-Temp™ Plus - Physical Properties:
    • Working time: 45 seconds.
    • Initial self-cure setting time: 2 minutes from start of mix (75 seconds after insertion in the mouth).
    • Final self-cure setting time: 4:45 minutes from beginning of mix.
    • Light cure setting time: 20 seconds (halogen light).
    • Flexural strength: 77 MPa.
    • Compressive strength: 200 MPa.
    • Deflection at break: 2.9 mm.
    • Vickers Hardness: 514 MPa.

Application:

  • For Dental Restoration Procedures.
Show More
Write Your Own Review
You're reviewing:Tuff-Temp™ Plus Provisional Veneer, Crown & Bridge Resin, 5mL Automix Syringe, 8 Automix Tips, 3mL Glaze, Shade A3.5 Pulpdent TTP5A35
Your Rating
@2023 Prime Dental & Medical Supply Inc., All Rights Reserved