Tuff-Temp™ Plus Provisional Veneer, Crown & Bridge Resin, 5mL Automix Syringe, 8 Automix Tips, 3mL Glaze, Shade A3 Pulpdent TTP5A3
Item Number: | TTP5A3 |
Packaging: | ea |
Manufacturer: | Pulpdent Corporation |
Special Order Item. 14-21 Days Delivery. Item can not be returned.
Features & Benefits:
- Tuff-Temp™ Plus Provisional Veneer, Crown & Bridge Resin is Dual Cure Material and has Improved Rubberized-Resin Chemistry.
- Strong, impact resistant rubberized-resin doesn't shrink or distort and grips the tooth tightly.
- Virtually eliminates fractures and debonding.
- Grinds and powders during trimming without softening or distorting. Margins are perfect.
- The light cure option produces a full strength restoration on demand and is ideally suited for use with a clear vinyl polysiloxane template.
- Flexural Strength / Deflection at Break.
- Tuff-Temp™ Plus exhibits very high flexural strength without brittleness. Its deflection at break, the key indicator of toughness, is 50% to 100% greater than bis-acrylics.
- Tuff-Temp Provisional Glaze is a light cure glaze with the same proprietary rubberized-urethane chemistry that provides enhanced esthetics and patient satisfaction during temporization.
- Tough and resilient.
- Impact and fracture resistant.
- Tight fitting temps grip teeth securely.
- Greatly reduces breakage and cementation failures.
- Grinds and powders without softening.
- Trims to crisp, perfect margins.
- Does not gum up finishing instruments.
- Self-cure with fast light cure option.
- Enhanced esthetics.
- Faster setting time.
- Snap set.
- Fluorescence added.
- Includes Tuff-Temp Plus 5mL automix syringe, 8 automix tips, 3mL Tuff-Temp Glaze, Shade A3.
- Tuff-Temp™ Plus - Physical Properties:
- Working time: 45 seconds.
- Initial self-cure setting time: 2 minutes from start of mix (75 seconds after insertion in the mouth).
- Final self-cure setting time: 4:45 minutes from beginning of mix.
- Light cure setting time: 20 seconds (halogen light).
- Flexural strength: 77 MPa.
- Compressive strength: 200 MPa.
- Deflection at break: 2.9 mm.
- Vickers Hardness: 514 MPa.
Application:
- For Dental Restoration Procedures.
Show More
Write Your Own Review