Carbide Burs FG 8 Round Shape (PK/10) Omega #10008

Item Number: 10008
Packaging: pk/10
Manufacturer: Omega Dental Products
$14.99

Features & Benefits:

  • Omega Dental carbide burs or Friction Grip Burs are made with high quality fine-grain tungsten carbide, which produces a blade that is sharper and wears longer compared to less expensive coarse grain tungsten carbide.
  • Blades made of fine grain tungsten carbide, retain shape even as they wear. Less expensive, large particle tungsten carbide dulls quickly as the large particles break from the blade or cutting edge.
  • Proper selection of tungsten carbide and high quality steel combined with a specialized heat treatment process and controlled welding operation creates the optimum conditions required to attain the impressive strength, durability, and minimal vibration.

Application:

  • Omega Dental Friction grip burs are used in high speed handpieces. In most offices, they are the main operative burs.

Omega Carbide Burs Specification:

Shape Round
Maximum Head Diameter in mm 2.10
Maximum Head Diameter in inches 0.091
Overall Length (mm) 19.0
Overall Length (inches) 0.748
Shank Diameter (mm) 1.60
Shank Diameter (inches) 0.0630

Cleaning and Sterilizing Omega Dental Carbide Burs:

  • The intention of these instructions is to provide guidelines for the sterilization of rotary dental instruments(burs, diamonds, les, etc.). Unless otherwise indicated, all instruments are supplied clean but not sterile. Itis the user's responsibility to sterilize instruments before the first use and if applicable, before eachadditional use. Instruments indicated as non-sterile single use should be processed following theseguidelines before the initial use only and then properly discarded.
  • Warnings: Used rotary instruments, damaged sterile packaging and unintentional open packaging shall beconsidered contaminated. Follow appropriate pre-cautions by utilizing this recommended sterilizationguideline. Also, personal protective equipment (PPE) including gloves, mask and eye protection should beworn. Further controls may be required if specific patient risk are present.
  • Cleaning: Automatic Cleaning is the recommended method for pre-sterilization cleaning. Follow themachine manufacturer's recommended method while utilizing approved agents for the cleaning of rotarydental instruments. If there is an excessive delay between use and cleaning, manual cleaning may berequired. In the case that automatic cleaning is not available, rotary dental instruments may be cleanedmanually. Manually brush debris from instruments under running water with a wire brush and approvedcleaning agent. PPE should be worn and care taken to avoid spreading contaminants during the brushingprocess. After cleaning, dry instruments with paper towel or dry heat not exceeding 140°C. Inspect andproperly discard any instruments with signs of excessive wear, damage or corrosion.
  • Sterilization: Saturated steam under pressure (autoclave) is the recommended method of sterilization forrotary dental instruments. The recommended cycle is 20 to 30 minutes at 121°C (250°F) at 15 to 30 psi. Forfaster processing a rapid cycle of 3 to 10 minutes at 135°C (275°F) at 25 to 30 psi is also acceptable.Operation of the autoclave should follow the manufacturer's recommended methods and materials.
  • Storage: Storage and Shelf Life of Pre-Sterilized Products 50°C (122°F Max). After sterilization, store instruments in a dry, clean, and ambient temperature environment.
  • Validation: These processes have been validated on Omega Dental burs rotary dental instruments.Following these instructions along with the instructions of the equipment utilized remains the responsibilityof the user. Proper steps should be taken to ensure all equipment is operating safely and properly inaccordance with manufacturer's guidelines. Any deviation from these guidelines may require subsequentvalidation and monitoring for effectiveness and potential risks. Results are maintained by Omega Dental.
Show More
Write Your Own Review
You're reviewing:Carbide Burs FG 8 Round Shape (PK/10) Omega #10008
Your Rating
@2023 Prime Dental & Medical Supply Inc., All Rights Reserved